Is part 17A-54-46130 EN 45545-2 certified?

Yes, HAMM Mount manufactures part 17A-54-46130 to EN 45545-2 fire safety standards, meeting HL2 and HL3 hazard level requirements for railway applications.

17A-54-46130 - Komatsu Bulldozer Cab Cushion | HAMM Mount | OEM Replacement

Name: Komatsu Bulldozer Cab Cushion Part 17A-54-46130
Brand: HAMM Mount
SKU: 17A-54-46130
Availability: InStock
Rating: 4.8 (156 reviews)

Komatsu Bulldozer Cab Cushion - Part 17A-54-46130

Part 17A-54-46130 is the companion cab cushion to the 17A-54-46120, used at alternate mounting positions on Komatsu bulldozer cabins. Both parts should be replaced as a set to maintain balanced cabin isolation. This mount works in conjunction with other cabin elements to create a complete vibration isolation system meeting ISO 2631 whole-body vibration exposure limits. The natural rubber compound provides excellent low-frequency isolation at the 2-8 Hz dominant vibration frequencies typical of bulldozer operation. Compatible with D155A and D61 series dozers heavily used in US mining and construction.

Manufactured by HAMM Mount in our ISO 9001:2015 certified facility using advanced vulcanization technology and premium rubber compounds. Every unit undergoes multi-stage quality control including dimensional inspection, hardness verification, and load-deflection testing. Fire safety compliance per EN 45545-2 is verified for all railway applications.

Part 17A-54-46130 | Komatsu Bulldozer Cab Cushion

Cross-Reference Part Numbers

17A5446130

This part may also be listed under the above alternate part numbers. All numbers refer to the same component.

Compatible Equipment & Models

Komatsu D155A-6, D155AX-8, D51EX-24, D61EX-23, D61PX-23, D61PX-24

Technical Specifications

Property	Value	Standard
Part Number	17A-54-46130	OEM Spec
Type	Komatsu Bulldozer Cab Cushion	-
Category	Cab Mounts	-
Dimensions	Square base, four-bolt mounting	OEM Spec
Cross-Reference	17A5446130	OEM
Hardness	60 ± 5 Shore A	ISO 48-4
Tensile Strength	≥ 18 MPa	ISO 37
Elongation	≥ 350%	ISO 37
Compression Set	≤ 20%	ISO 815-1
Temperature Range	-45°C to +85°C	-
Fire Safety	EN 45545-2 HL2/HL3	Railway
Fatigue Life	> 2.5M cycles	Testing

Applications

Part 17A-54-46130 is used in Komatsu bulldozer operator cabin vibration isolation. Compatible models include: Komatsu D155A-6, D155AX-8, D51EX-24, D61EX-23, D61PX-23, D61PX-24.

Railway & Transit: Metro systems, light rail, passenger trains, freight locomotives - primary suspension and bogie component applications
Construction Equipment: Excavators, bulldozers, wheel loaders by Caterpillar, Komatsu, Volvo
Mining & Heavy Industry: Mining trucks, material handling equipment, crushing and screening plants
Automotive: Engine mounts, transmission mounts for heavy trucks and passenger vehicles
Power Generation: Generator set mounting, industrial compressor isolation

Material & Compound

Base Polymer: Natural Rubber (NR) / SBR blend - optimized for vibration damping
Reinforcement: High-strength fabric layers and steel reinforcement plates
Protection: UV stabilizers, antiozonants, antioxidants for extended service life
Fire Safety: EN 45545-2 compliant fire retardant additives
Bonding: Proprietary rubber-to-metal bonding process (> 25 MPa pull-out strength)

Installation & Maintenance

Installation

Clean mounting surfaces - remove all oil, corrosion, and old rubber residue
Verify part number 17A-54-46130 matches equipment specifications
Position component with correct orientation per installation drawings
Install hardware hand-tight, then torque in stages (30%, 60%, 100%) using cross-pattern
Re-check torque after 100 hours of operation

Inspection Schedule

Monthly: Visual check for cracks, tears, contamination
Quarterly: Torque verification, deflection measurement
Annually: Hardness test, comprehensive condition assessment

Quality & Certification

ISO 9001:2015 Quality Management System
EN 45545-2 Fire Safety (HL2 & HL3)
100% incoming material testing
SPC-monitored vulcanization process
Load-deflection testing per batch
Full traceability documentation available

Request Quote for Part 17A-54-46130

Factory-direct pricing from HAMM Mount. Ships to USA, Canada & worldwide.

Get Free Quote

Frequently Asked Questions

What is part 17A-54-46130?

Do you ship to the United States?

Yes, HAMM Mount ships to all 50 US states. Standard delivery is 7-10 business days via DHL or FedEx with full tracking and insurance. Express 3-5 day service is available for urgent orders.

What warranty is included?

Part 17A-54-46130 carries a 24-month warranty against defects in materials and workmanship under normal operating conditions.

Can I get custom modifications?

Yes, HAMM Mount offers custom modifications including dimensional changes, alternative rubber compounds, special hardness grades, and additional certifications. Contact our engineering team.

HAMM MOUNT

Part 17A-54-46130